SG10

High-speed. Lightweight. Perfect for making clean cuts into newly poured concrete.

  • Great for relief joint sawing in new concrete.
  • Powered by a 7hp Subaru engine with two-stage air filtration.
  • Adjustable handle height for operator comfort

The SG10, the fastest saw on the market, can be used to make clean cuts into newly poured “green” concrete or general slab cutting. The combination of a center mounted blade and dual roller guides gives the operator the tools to make straight cuts everytime. Unique 6000rpm blade shaft speed allows the blade to “slice” through green concrete cleanly, without disturbing the aggregate.

Street Saw

The SS18A Street saw is a rugged, powerful walk-behind saw designed for cutting asphalt and concrete.

  • Quick release pointer
  • Steel water feed tubes for even blade cooling
  • Honda GX390 & Subaru Engines

The 13hp engine provides ample power for single 18″ blades or in dual cutting mode with 14″ blades.  In single cut set-up the blade can be operated on either side of the saw.  We’ve built in many great features to make use easy for contractors.

Options:

Water kit with 5 gallon reserve.
2nd blade guard assembly.
Ultra low emission exhaust.

IDP710SR

The IDP710SR Electric Tile Saw accepts a 7″ dia. blade combining high performance, increased cutting capacity and improved durability.

  • Affordable
  • Portable 
  • E.D.I. system for indicating status of system function

The IDP710SR Electric Tile Saw accepts a 7″ dia. blade combining high performance, increased cutting capacity and improved durability.  The IDP710SR has enough power to handle virtually any tile job.  The power is complemented by a generous cutting capacity that allows for cutting lengths of up to 20″ straight and 14″ diagonal.  ideal for contactors in need of an affordable, portable, wet tile saw that will deliver.  This saw comes with our E.D.I. system that indicates the status of several system functions.

IDP1000JR

Power through tile like butter with the IDP1000JR

  • Polypropylene Water Tray
  • Water Pump
  • Adjustable Cutting Height

Polypropylene Water Tray

Bartell uses an improved polypropylene water tray on most of its tile saws. It offers better durability and support than ABS trays and is lighter than stainless steel trays. Trays are backed by a 2 year warranty.

Water Pump

A high-output water pump provides sufficient cooling water flow for maximum protection of the the diamond blade.

Adjustable Cutting Height

Cutting depth can be easily adjusted to accommodate 6″ to 10″ (15-25 cm) blades and to provide plunge cutting functionality.

Rubber Matted Cutting Table

The new cast aluminum cutting tables are covered by a rubber mat that is injected directly onto the table and chemically bond for enhanced durability.

Water Tray Bracket

The water tray is secured in place by an easily accessible bracket.

Table Retention Device

The cutting table is equipped with a spring lock to secure the cutting table when transporting the saw in between job sites.

Thermal Overload Protection

Automatic thermal overload protection prevents the motor from overheating and protects the saw from power surges.

Blade Guard with Brushes

The blade guard contains brushes that not only minimize spray, but they also uniformly distribute  the water over the blade for more effective cooling.

LCBH

The patented LCBH (Liguid Cooled Bearing Housing) works in conjuction with the water pump to cool down the bearing housing during saw operation. This feature increases the service life of the bearing housingeven under heavy loads.

*Includes folding wheeled stand (not shown) and tile blade

IDP1410

The IDP1410 Masonry Saw is designed for the professional contractor in mind. It enhances performance with a multitude of features facilitating operation.

Features

  • Powerful 3 HP (at peak) carbon brush motor cuts large material in a single pass.
  • Optional vacuum system for dust collection.
  • Reinforced rigid frame construction provides steady precision cutting.
  • Optional outer tray for wet application.
  • Table locking mechanism facilitates the saw’s chopping operation.
  • Sturdy handles for easy transport.
  • Clear view air filter is easily maintained and protects the motor providing a longer life for the motor.
CS 450 Floor Saw

CS 450 Floor Saw

Simple to operate and highly durable – the CS 450 range of SPE floorsaws are ideal for demanding heavy duty applications.

  • 450mm (17.7″) blade diameter capacity
  • Road trenching, cutting of conceret, asphalt, floor slabs
  • Heavy duty design with integral water tank
  • Easily transported

Features

  • Monocoque construction is rigid, strong and accurate
  • Screw type raise and lower control
  • Handle height adjustment
  • Available in petrol and 3 phase electric versions
  • Compact and transportable
CS 350 Floor Saw

CS 350 Floor Saw

Simple to operate and highly durable – the CS 350 range of SPE floorsaws are ideal for demanding heavy duty applications.

  • 350mm (13.7″) blade diameter capacity
  • Road trenching, cutting of conceret, asphalt, floor slabs
  • Heavy duty design with integral water tank
  • Easily transported

Features

  • Monocoque construction is rigid, strong and accurate
  • Screw type raise and lower control
  • Handle height adjustment
  • Available in petrol and 3 phase electric versions
  • Compact and transportable
CS 230 Floor Saw

CS 230 Floor Saw

For joint cutting or chasing, the CS 230 range of SPE Floorsaws is the ideal solution.

  • 230mm (9″) blade diameter capacity
  • General cutting of conceret, asphalt, floor slabs
  • Single blade use or 2 bladed can be spaced up to 40mm apart
  • Fully articulated blade guard

Features

  • Dust free when used with SPE 316 vacuum
  • Cuts with 1 or 2 blades
  • Adjustable spacing between the blades
  • Compact and easily transported
  • Available in petrol and electric versions